Sand And Gravel Production LineDate:2019-06-15

Summary:Before the operation of the sand and gravel production line, it is best to be familiar with the standard process of machine operation. At the beginning of the d

Too tired to read? Try staff service!

Engineer one-to-one for you, draw up plans in time, and provide investment estimates in time!

Get Price Staff Service

Before the operation of the sand and gravel production line, it is best to be familiar with the standard process of machine operation. At the beginning of the design and production of the sand and gravel production line, our company has very strict requirements on the use of parts and components, and has high requirements on the structural and structural requirements of the parts. The manufacturing cost often determines the cost of the overall sand washing machine. Therefore, the structural and processability of the parts must be considered in the design of the parts. The good processability can not only meet the requirements of use, but also make the manufacturing process simple and the manufacturing cost low.

The shape of the sandstone production line parts is as simple as possible, and it is easy to install the card, minimizing the number and area of ??the machined surface. It is best to avoid the use of models and molds for parts produced in single or small batches, and it is best to use general equipment to process; Use profiles as much as possible. When designing the structure of the part, the requirements of the disassembly and assembly process should be considered to facilitate assembly and maintenance, and the type and shape of the blank can be reasonably selected. High-volume parts are preferred for casting, forging or stamping blanks. The application of the sand and gravel production line is simpler and easier to use. Now it is becoming more and more important in the development of society and has become an indispensable member.

Standard standards are the theoretical summary of experience, is the first principle of reducing cost, is also an index to evaluate the design quality, at the same time, master the high sand and stone production line standards and specifications is one of the tasks of course design. In the selection of standard parts, our company will reduce the specification and material brand as far as possible, reduce the variety and specification of standard parts, and choose the general specification that can be fully supplied in the market as far as possible, so as to achieve the purpose of convenient use and maintenance and reduce cost. In the course design, only non-standard parts need to be designed, and standard parts only need to be selected according to the design requirements, such as rolling bearings, bolts, etc., because standard parts are mostly produced by professional manufacturers, which are usually of high quality and low price.

Next : Sand Washing Machine Equipment

Request a Quotation

Hot Sale